Skip to Content

Have vehicles and technology blasted with dry ice in Kirchardt

Dry ice blasting enables the targeted cleaning of suitable surfaces without the blasting medium remaining in the component as sand or water.
NORIQA plans the use of the process according to the contamination, material, accessibility and the desired subsequent step.
A realistic assessment is crucial: dry ice blasting is a cleaning process and is not the right solution for every coating, corrosion or surface.
Dry ice blasting on a dirty metal surface with a clearly visible cleaned trace
Targeted cleaning: Contamination, substrate and desired result determine the suitability of the process.

Suitability before execution

Clean without overestimating the procedure.

Dry ice blasting is primarily a cleaning process. We will therefore clarify whether it suits the vehicle, the surface and the desired result before making an appointment.

May be useful

When contamination needs to be specifically removed.

  • accessible underbody areas
  • certain fats, oils and deposits
  • selected engine compartment and technical areas
  • Preparation of a condition assessment
Check other procedure

When material removal or corrosion removal is required.

  • pronounced rust and loss of material
  • load-bearing or particularly strong coatings
  • inaccessible areas without controlled cleaning
  • sensitive components without prior suitability testing
Consider sandblasting as an alternative

Process in Kirchardt

From the first photo to the controlled handover.

Short paths and clear testing protect sensitive components and ensure traceable results.

  1. 01
    Classify requestClarify photos, vehicle area, contamination and destination.
  2. 02
    Check componentAssess material, coating, electrical and sensitive areas.
  3. 03
    Prepare executionDetermine accessibility, protective measures and test area.
  4. 04
    Clean & checkProcess surfaces, pick up residue and check the results.
More than a clean surface

Recognize the condition better and make sensible further decisions.

A cleaned surface may reveal leaks, coating conditions, corrosion or previous repairs. If desired, we can combine cleaning with a structured technical classification.

View vehicle analysis

Frequently asked questions about dry ice blasting

Important information about cleaning vehicles and components.

Where does NORIQA carry out dry ice blasting work?

Only in our designated rooms at Leisenbergweg 5 in 74912 Kirchardt. Vehicles and components can be delivered after prior registration. We do not offer a mobile version for the customer.

Is dry ice blasting always gentle on the material?

The effect depends on the surface, condition and process parameters. Delicate, aged or unknown materials should be checked and, if necessary, tested on a small area first.

Are there any residues left after blasting?

The dry ice itself sublimates. However, the dissolved contamination remains there and must be picked up or removed in a controlled manner.

Can dry ice blasting remove rust?

The process is primarily used for cleaning. Loose components can come off, but severe corrosion or stable coatings often require other processing methods.

Can an entire subfloor be processed?

This depends on accessibility, coating, contamination and existing installations. It is determined in advance which areas are sensible and safe to reach.

What information is needed for the assessment?

Photos, vehicle or component type, type of contamination, known coatings, sensitive components and the desired cleaning result are required.